Trendnet 802.11g Uživatelský manuál stáhnout pdf (Strana 6)

User’s Guide

3. Hardware Installation

Front Panel

The front panel provides LED’s for device status. Refer to the following table for the meaning of each

feature.

LED STATUS Description

Off No power

Green On

1. Power on 2. Reset to default 3. Firmware upgrade (first 1

minute)

PWR/STAT

Green

Blink

1. System up 2. Power on 3. Firmware upgrade

Off no Ethernet link detected

Green On

10/100Mbps Fast Ethernet link detected. No activity.

Link

Green

Blink

Indicates data traffic on the 10/100 Mbps LAN

Active

Green

Blink

Indicates the device is linking or active data throug

h wireless

links

Rear Panel

The rear panel features 1 LAN ports and Reset button. Refer to the following table for the meaning of

each feature.

Power (DC 5v)

Used to connect to the power outlet. Only use the power

adapter provided with the device. Use

of an unauthorized

power adapter may cause damage to your device and

violate your warranty.

Reset

Press the Reset Button for approximately ten seconds, all

configurations will set to factory default settings.

LAN

The RJ-45 Ethernet ports used to connect

your PC, hub,

switch or Ethernet network.

AP Default Settings

The default settings are shown following.

User admin

Password admin

AP IP Address 192.168.1.250

AP Subnet Mask 255.255.255.0

RF ESSID ap11g

11g RF Channel 6

Mode 11b+g

Encryption Disabled

1 2 3 4 5 6 7 8 9 10 11 ... 23 24

Komentáře k této Příručce

Žádné komentáře

Trendnet 802.11g Uživatelský manuál Strana 6

Komentáře k této Příručce

Související produkty a manuály pro Sítě Trendnet 802.11g