Trendnet Network Router USB 2.0 & IDE Network Storage Enclosure Uživatelský manuál Strana 4

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 12
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 3
2. Hardware Installation
English
2
1. Remove the two screws from the
rear panel to detach the cover.
2. Make sure the jumper settings on
the hard drive is set to Master.
Note: Before installing the IDE hard drive, the jumper settings must be set to
Master.
4. Place the hard drive onto the metal
bracket and secure it with four
mounting screws.
3. Connect the IDE cable and power
cable to the hard drive.
5. Replace the cover and secure the
two screws.
Zobrazit stránku 3
1 2 3 4 5 6 7 8 9 10 11 12

Komentáře k této Příručce

Žádné komentáře